Bond and strength – key factors in coatings
Steel pipes are coated with a corrosion prevention system, either at the factory or on the construction site. When the individual steel pipes are welded together to become pipelines, the coating that was applied in the factory must be partially removed.
Once the pipes have been fused together, a new coating is applied to the welded seam to protect them against corrosion and mechanical loads. The sensitive weld seam must be at least as well protected as the rest of the pipe – because a chain is only as strong as its weakest link.
In addition to a simple application process, a long-life, reliable corrosion protection solution and good resistance to mechanical loads are also important factors – and the maximum operating temperature must always be taken into account too. DEKOTEC's system solutions offer weld seam coatings for all kinds of processes, including cold or hot processing and sprayable and liquid coatings, e.g. for special applications.
Cold processed – no burner required
For weld seam coatings, PLASTELEN® petrolatum tapes and BUTYLEN-PE/butyl tapes can be applied manually using a simple and safe process, without any additional equipment and without a burner. To increase efficiency, manual or motor-powered DEKOMAT® wrapping devices can be used with BUTYLEN-PE/butyl tapes.
The quality standard for corrosion prevention
For almost a century, cold-processed PLASTELEN® tapes have been used as corrosion prevention coating on pipelines at operating temperatures from -40°C to +110°C or -40°F to +230°F. With the invention of the petrolatum tape in 1927, we set the quality standard for passive corrosion prevention.
Millions of metres of measurable success
Pipelines can be protected against corrosion and mechanical loads quickly and permanently using cold-processed BUTYLEN-PE/butyl tapes. The layers of the tape fuse together, due to the 3-ply structure, to create a protective hose that is fully sealed at operating temperatures of -40°C to +100°C or -40°F to +212°F. Immediately after application, the pipeline can be operated at full load. Many millions of metres of BUTYLEN-PE/butyl tapes have already been successfully applied across the world.
Hot processed – burner required
DEKOTEC® heat shrinkable sleeves are applied as weld seam coatings using application equipment (a burner).
User friendly: No pre-heating and even suitable for high temperatures
Our DEKOTEC® heat shrinkable sleeves are applied directly to the steel surface as a two-layer (without primer) or three-layer (including primer) corrosion prevention system. The systems are easy to apply without a time-consuming preheating process (DEKOTEC®-MTS) and are extremely resistant to operating temperatures ranging from -40°C to +90°C or -40°F to +194°F (DEKOTEC®-HTS).
Sprayable and liquid coatings for special applications
LIQUITOL® coatings are used in special processes such as trenchless installation. They are suitable for operating temperatures of -20°C to +80°C.
Coating at the factory or on the construction site
The solvent-free product LIQUITOL®-FK2 is a sprayable or liquid coating that is reliable and quick to apply. The product's exceptional hardness combined with just the right amount of stretch provide optimum resistance to mechanical and corrosive loads at operating temperatures from -20°C to +80°C or -4°F to +176°F.
Horizontal directional drilling (HDD) and pipe-plough method
Welded seams on pipes that are laid using horizontal directional drilling or the pipe-plough method must be reliably protected against corrosion and the immense mechanical loads they are subject to. Both of these methods are ideal applications for LIQUITOL®-HDD. This product is characterised by its exceptional hardness and abrasion resistance, combined with excellent stretch resistance and bending strength. The pipe can be pulled into the channel a very short time after application.
Pipe driving or pipe ramming
In pipe driving (dynamic pipe ramming), LIQUITOL®-TLC is the perfect weld seam coating solution. LIQUITOL®-TLC features fast curing as well as a high abrasion and shear strength. After application, a burner flame can be used to accelerate the curing process even more.